About
PRANS HSS X7 unit for surface preparation. Designed for high-speed and high-quality thermo-abrasive cleaning of metal and other surfaces from corrosion, limescale, carbon deposits, hardened
and not old multilayer paints and other contaminants and for subsequent application to the prepared surfaces of metal or composite protective coatings.
Cleaning and coating process video:
ADVANTAGES
High Performance
High performance and ability to apply thick coating layer
Quality of Treatment SA 3+
The quality of surface treatment is guaranteed at the level SA 3 and higher (a potential of 0.7-0.8 V is formed on the surface) without any kind of contamination and oxide films
Low Abrasives Consumption
Consumption of any abrasive required for high-quality surface preparation is several times less.
Safe & Easy
Complete safety and ease of use of PRANS HSS X7 and X8 equipment
Before & After Samples
Cleaned with HSS
Original Surface
Cleaned with HSS
Original Surface
Cleaned with HSS
Original Surface
Gallery
Technical Specs
Supply voltage
220 V, 50 Hz
Working air pressure
0.7–0.8 MPa
Airflow
4.5–6.5 m3/min
Durability of the wear part of the nozzle (pipe DIA 1")
2-3 hours
Types of materials
Diesel consumption
8.0–15.0 l/h
Operating temperature range
from -5°C to +30°C
Flat surface cleaning performance
20-40 m2/hour
The maximum particle size of the abrasive
1.0 mm
Abrasive consumption
6–15 kg/m2
Legal Info
Licenses
Equipment “TRANS 5-8” TU 3864-001-13339705-2006
Coatings applied with the equipment “PRANS” TU 2458-002-13339705-2015
Trademark
“PRANS” is a registered trademark, Certificate no.575080 dd. May 19, 2016.
